| and it is always preferable to have a seasoned professional make the
identification for you to be sure. Here are a couple of the methods jewelers use. The
Stone Is Too Clean: As a jeweler, the number one red flag, besides plain ol'
experience, is if, at first glance, the stone is too "clean". This means that
with a 10-power jewelers loupe or other magnification, the stone has no apparent
inclusions within it. "Inclusions" is the label given to the various natural
features found within minerals such as diamond. An apparently internally flawless stone is
always a red flag, as in general, fewer consumers purchase expensive Flawless, Internally
Flawless, or Very Very Slightly Included (VVS) diamonds, preferring less expensive
diamonds which have inclusions relatively easy to see with a loupe (VS, SI and I stones).
Diamond Testers: Once a sure fire way to identify a diamond, a diamond tester is
a little gadget which, when pressed against the stone, says yes or no to the question,
"Is this a diamond?." It won't tell you what it is if its not a diamond, but it
will indicate if it is. It is important to not touch a prong or other metal with the tip
while testing, to try to press against the middle of the top of the stone, and to make
sure the stone is very clean. Unfortunately, there is now a synthetic stone which will
test positive on a diamond tester, so you can no longer rely on this method alone. You
should always use a diamond tester in conjunction with another method, such as checking
for doubling.
Magnification and Doubling: This means that if you look through the stone while
it is magnified (microscope is best, but loupe, with practice, will do) while it is face
up, and you focus through the stone to the facet edges furthest away from you, you will
see that they are doubled (you can see two of each line, as if your vision was blurred).
Again, you need to be sure to clean the stone very well. If you see doubling, it is not a
diamond. However, not all diamond simulants exhibit doubling, so you can't use this method
alone.
Bottom Line - Seek Professional Help: Most jewelers will give you a quick
opinion on "CZ or diamond" at little or no charge, and if the stone is
questionable, will recommend you send the stone to a gem lab for definite identification.
Make sure you have a definite ID before you make that purchase or sale, and get at least
two professional opinions to rule out any unskilled or disreputable jewelers.
If you have a question we can help you with, please feel free to email us here at Mrs. Gottrocks Fine Jewelry
and Gifts. |