Wedding Crafts - Floral and Layered Bows - Your Online Wedding Planning Guide and Resource

Making Floral and Layered Bows
submitted by http://www.floralhome.com/

Making Floral Bows

A floral bow is one that has a variety of loop sizes. The larger loops are around the outside of the bow and the sizes gradually get smaller towards the center. They may have as few as four to eight loops or as many as twenty to thirty loops. The loops are spread apart to make the shape oval or round and tails are generally hanging below.

From The Secrets of Making Bows.

Making a Floral Bow
1. Pinch the ribbon and make a loop leaving the tail the desired length.

2. Continue making loops gradually increasing the size of the loops until the bow is full and you have enough ribbon left to make the other tail.

3. Secure the center of the bow with wire.

4. Fan out the loops.

5. Cut the tails at an angle or in points to finish off the bow.

Making Layered Bows

The layered bow is two (or more) separate bows, of various sizes, stacked on top of each other. They can be glued in place or held together by twisting all the wires together. Usually each bow is a different color, texture or pattern in addition to being a different size. The bottom bow or bows can be a floral or loopy type bow. The top bow should have a center loop to cover the wire, as done in the wreath bow.

From The Secrets of Making Bows, item #11420, 44 pages, available from Mark Publishing.

Making a Layered Bow
1. Make a floral or loopy bow. If layering more than two bows, make additional floral or loopy bows. Each one should be slightly smaller than the last.
2. Make a wreath bow, slightly smaller than the smallest floral or loopy bow.
3. Lay the smaller bow over the center of the larger bow and connect the wires by twisting them together under the larger bow.